Auto Clearing All Make & Performance Parts Center

Flo-Tek SBC Aluminum Cylinder Heads

• Straight or Angle Plug
• 180cc Intake Runners
• 64cc Combustion Chambers
• 2.02" and 1.60" Stainless Valves
• Performance Springs Good To .550" Lift
• Manganese Bronze Intake Guides
• 5 Angle Valve Job
• High Temp Exhaust Seats
• 3/8" Screw-In Studs and Guide Plates
• Price is for pair of heads

5-Point HANS Latch & Link Harness

All RaceQuip harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. 3" premium nylon webbing is used and all belts are box-x
pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify
compliance with SFI 16.1 standards. This harness set has narrow shoulder belts to better fit a head & neck
restraint like a HANS device. Exceeds SFI 16.1 Rating

Penske 7500 Double Adjustable Shocks

No longer are hoses and remote canisters required to get the benefits of a Penske Racing Shocks double adjustable.
With 40 clicks of compression and 18 sweeps of rebound, the new in-line 7500DA shock absorber is quickly and easily
tuned to accommodate any track or driving condition. Featuring an aluminum body and nitrogen separator piston for
increased performance. The In-Line Double Adjustable 7500 Series Shock is available for drag, short track, sports car, and high-performance street applications. Call us and order today!

KRC Basic Crate Engine Pulley Kit

602 & 604 Crate Motor Crate Engine Kit (Block Mounted Power Steering) KRC's basic crate engine kit is the starting point for your complete crate engine kit. We have brought in a Basic Kit that includes all the pulleys, power sterring pump bracket, bolts & spacers to get you started. Just add your Water Pump, Power Steering Pump & Alternator or if need be, buy the ones that we have. We have it all in stock to complete the job. Don't worry about cooling on Race Day, See us to get you started right!!!

Coleman Metric Sportsman Hub

This billet steel hub and rotor is designed as a direct replacement for the stock hub assembly. It fits the mid-size Monte Carlo and similar spindles. And is designed to line up with the stock caliper. It has 5 x 5" and 5 x 4 3/4" bolt patterns with 5/8" coarse thread studs This hub uses stock bearings, races and dust cap. Rotor & Bearings Sold Seperate.